How to Clean a Dyson Vacuum Cleaner

Is your trusty Dyson vacuum starting to emit a funky smell or losing suction power? Before you consider replacing it, there’s a good chance that your vacuum just needs a thorough cleaning. 

We all tend to forget about this important household chore, But it’s crucial to know how to clean a Dyson vacuum cleaner properly to maintain this expensive investment. 

By regular cleaning, you will not only optimize Dyson’s performance but extend its lifespan. In this article, we’ll walk you through every step that you need to apply to clean your Dyson vacuum cleaner. We’ve also shared share some real-life tips to make the process even easier.

Step-by-Step Guide to Clean a Dyson Vacuum Cleaner

Supplies Required

Before we dive into the step-by-step guide, let’s review the supplies you’ll need to clean your vacuum cleaner:

  • Soft cloths or towels
  • Compressed air
  • Mild soap or detergent
  • Water
  • Small brush
  • Replacement filters (if necessary)

Now that you have gathered all the necessary supplies let’s start cleaning your Dyson vacuum cleaner.

Step 1: Disconnect the Power Supply

Safety first! Ensure your vacuum cleaner is unplugged from the power source to avoid electrical mishaps.

Step 2: Empty the Canister

Empty the canister of debris or dust accumulated inside by removing the canister from the vacuum cleaner and emptying the contents into a trash can.

Discard the vacuum’s contents into an outdoor trash bag to avoid dirt and debris spreading within your house.

Step 3: Detach the Foam Filter

Detach the foam filter by pressing the release button and carefully pulling it out of your vacuum cleaner. If your filter is particularly dirty, consider soaking it in warm water with a mild detergent before cleaning it with compressed air.

Step 4: Remove the Roller Cover

Over time, hair and other debris can get tangled in the roller cover, causing it to smell. Remove the roller cover and use a pair of scissors to cut any hair or debris caught inside.

Step 5: Use Compressed Air to Clean

Use a can of compressed air to blow out debris or dust that has built up inside your vacuum cleaner.

Hold the compressed air canister upright while using it to avoid any liquid from spilling out.

Step 6: Cleanse the Canister Thoroughly

Using a soft-bristled brush, gently loosen any debris or dirt that may have adhered to the canister’s sides. Next, take a damp cloth and wipe away any grime and dirt that have accumulated.

Step 7: Cleanse the Sponge

Remove the sponge and cleanse it with warm, soapy water. Make sure to rinse it thoroughly and let it dry completely before putting it back into the vacuum cleaner.

Step 8: Rinse and Wash the Canister

Rinse the canister with warm water after cleansing the canister with a damp cloth. Then, mix warm water and mild dish soap and wash the canister. Rinse it again and let it air dry completely before reassembling the vacuum cleaner.

Step 9: Wipe the Cyclone

Using a damp cloth, clean the cyclone and remove any dirt or debris that may have built up.

Step 10: Air-dry and Reassemble

Ensure that all parts are completely dry before reassembling the vacuum cleaner. Attach the roller cover, foam filter, sponge, and canister and lock them into place. Now, your vacuum is all ready to use. 

Also Read: How To Clean Vacuum Cleaner Brush Like A Pro 


Regular maintenance of your Dyson vacuum cleaner ensures efficient cleaning while promising to last for a long time. We have outlined these simple cleaning steps for cleaning your Dyson vacuum. Follow them to maintain the suction power of your vacuum and prevent unpleasant smells from building up.


Leave a Comment