How To Clean Vacuum Cleaner Hose

Having a vacuum cleaner with dropped suction power can be incredibly frustrating. While many homeowners immediately assume that the bag or canister is the issue, an underfilled bag means the problem lies elsewhere – likely within the vacuum hose.

Clogs in the vacuum hose are common due to debris buildup, leading to trapped hair and fibers that cause a blockage and reduced suction power. Occasionally, larger objects can get lodged in the hose without you even realizing it. To help you detect them and get your vacuum hose clog-free, we have got you covered. 

In this article, we’ll walk you through comprehensive steps on cleaning a vacuum cleaner hose. 

So, you can remove debris, hair, or other particles that build up inside the hose to restore its suction power and allow for more efficient home cleaning.

10 Easy Steps to Clean Your Vacuum Cleaner Hose 

  • A bucket or basin
  • A cleaning brush or an old toothbrush
  • A mild detergent or soap
  • Water
  • A clean towel or cloth

Step 1: Collect Your Cleaning Supplies

Gather all the necessary equipment on hand to start cleaning. Fill up a basin or bucket with lukewarm water and a mild detergent or soap.

Step 2: Detach the Hose from the Vacuum

Remove the clips or screws holding your vacuum’s hose and inspect it for any visible blockages or damage.

Step 3: Remove Loose Debris from the Hose

Turn the hose upside down over a trash can and gently tap it to remove loose dirt and debris accumulated inside the hose. You may also use a cleaning or old toothbrush to eliminate stubborn debris.

Step 4: Cleanse the Hose with a Brush

Dip your cleaning brush or toothbrush into soapy water and thoroughly scrub the inside of the hose. Deeply clean bends and crevices since it accumulates dirt often.

Pro-Tip:
Use a long-handled brush to reach the inside of the hose.

Step 5: Rinse the Hose with Water

Rinse the hose with clean water to remove soap residue. Hold the hose under running water or rinse it thoroughly with a clean sponge or cloth.

Step 6: Wash the Hose with Soap and Water

Wash the hose with soap and water if the hose is dirty. Simply add a small amount of mild detergent to the bucket of water and use a cleaning brush or sponge to wash the hose thoroughly.

Step 7: Rinse the Hose Thoroughly with Water

Rinse it thoroughly with clean water to remove any soap residue. Ensure that you rinse it completely so no soap remains.

Step 8: Disinfect the Hose

To disinfect the hose, soak it in a water and white vinegar solution for 30 minutes. This will kill any bacteria or germs lurking inside the hose.

Step 9: Dry the Hose

Dry the hose thoroughly before reattaching it to the vacuum cleaner. Use a clean towel or cloth to wipe away excess moisture, or hang it to air dry.

Step 10: Reattach the Hose to the Vacuum

Reattach it to your vacuum once the hose is completely dry. Align the hose with the opening on the vacuum and push it in until you hear it click or feel it snap into place. Give the hose a gentle tug to ensure it is secure before using the vacuum.

Also Read: How To Clean Vacuum Cleaner Filter? 

3 Surefire Tips to Maintain a Clean Vacuum Cleaner Hose

Regular Cleaning

Clean the hose regularly to prevent any debris buildup that can affect your vacuum’s suction power. Clean it at least once every three months to ensure it works efficiently.

Proper Storage

Store your vacuum in a dry and clean area, away from moisture or humidity. Additionally, store the hose straight and avoid sharp bends or kinks that could cause blockages.

Check for Blockages

Remove the hose from the vacuum to check for blockages and shine a flashlight inside. If you notice any blockages, use a long object like a broomstick to remove them. 

Conclusion 

Keeping your vacuum cleaner hose clean is crucial to maintaining its performance and longevity. With the ten easy steps outlined in this guide, you can effectively clean your vacuum hose and ensure it continues functioning at its best.

Remember to follow safety precautions while cleaning and to regularly maintain your vacuum cleaner hose by storing it properly, checking for blockages, and cleaning it every three months. 

 

Leave a Comment